Three Relay Touch Tone Remote Controller (Model RC-3)

NEW
Similar to the RC-2A, the RC-3 provides 3 DTMF Touch Tone controllable relays. In addition, up to three RC-3's can be daisy chained to a single communication path to provide up to 9 contact closures. The RC-3 also provides a one number dialer for outbound dialing.
Control up to 3 Relay Contacts Remotely
The RC-3 Remote Controller provides remote relay operation for up to 3 relays from any Touch Tone telephone.

The controller is designed to be installed either locally or remotely. For local installations the RC-3 can be installed in series on any communications path, such as Viking’s W-Series Doorboxes.

For off-premise applications, the RC-3 can be installed on a line shared by a key system, PABX, single line phone or on a dedicated line. The RC-3 will answer C.O. lines or analog PABX/KSU station ports and allow remote relay operation after programmable number of rings. A field programmable security code can also be programmed to prevent unauthorized usage.

Three RC-3's may be cascaded to provide up to 9 relay closures from a single line.

Note: For applications where only a single relay closure is required, the RC-2A is available

Applications
  • Programmable security code
  • Selectable relay time delays
  • Non-volatile memory
  • Switchable 12V DC talk battery
  • Programmable ring delay
  • Cascadeable to provide up to 9 relay closures
  • Easy installation with modular jacks and screw terminals
  • Normally open or normally closed relays
  • Contact initiated pulse dialer
  • One year warranty
Features
Remote Control of...
  • High security building entry
  • Heating/cooling equipment
  • Pumps and fans
  • Security systems
  • Gates
  • Lighting
  • PABX/KSU reset
Specifications
  • Power: 120VAC / 13.8VAC 1.25A adapter provided
  • Dimensions: 133mm x 89mm x 44mm (5.25" x 3.5" x 1.75")
  • Shipping Weight: .9 k (2 lbs)
  • Environmental: 0° C to 32° C (32° F to 90° F) with 5% to 95% non-condensing humidity
  • Pulse Dialing Speed: 10 pps
  • Talk Battery Output: 12V DC (15 V DC nominal)
  • Connections: (2) RJ-11 jacks and 10 pin screw terminal block
  • Relay contact ratings: 220 V AC/DC @ 1 amp