Touch Tone Remote Controller (Model RC-2A)

NEW
The RC-2A provides a DTMF Touch Tone controllable contact closure over an established communication path. The RC-2A can be programmed to answer a ringing line orpassively monitor a phone call for the Touch Tone code that will activate its relay.
Control Relay Contacts Remotely
The RC-2A Remote Controller provides remote relay operation from any standard Touch Tone telephone.

The controller is designed to be installed either locally or remotely. For local installations the RC-2A can be installed in series on any communications path, such as Viking’s W-Series Doorboxes.

For off-premise applications, the RC-2A can be installed on a line shared by a key system, PABX, single line phone or on a dedicated line. The RC-2A will answer C.O. lines or analog PABX/KSU station ports and allow remote relay operation after programmable number of rings. A field programmable security code can also be programmed to prevent unauthorized usage.

Note: For applications where more than one relay closure is required, the RC-3 is available

Applications
Remote Control of...
  • High security building entry
  • Heating/cooling equipment
  • Pumps and fans
  • Security systems
  • Gates
  • Lighting
  • PABX/KSU reset
  • One year warranty
  • Made in the USA.
Features
  • Programmable security code
  • Selectable relay time delays
  • Programmable ring delay (2 or 15)
  • Easy installation with modular jacks and screw terminals
  • Normally open or normally closed relay
Specifications
  • Power: 120VAC / 13.8VAC 1.25A adapter provided
  • Dimensions: 133mm x 89mm x 44mm (5.25" x 3.5" x 1.75")
  • Shipping Weight: .9 k (2 lbs.)
  • Environmental: 0° C to 32° C (32° F to 90° F) with 5% to 95%
  • non-condensing humidity
  • Connections: (2) RJ-11 jacks and 2 pin screw terminal block
  • Relay contact ratings: .5 A @ 125VAC / 2.0 A @ 30VDC