ADA Compliant Blue Light Tower Phone (Model E-1600-BLT)

Viking is developing a new wall or post mountable emergency phone based on its successful 1600 Series Phones. The phone will share all the features of the 1600 Series plus an extremely vandal resistant wall mount tower enclosure and a flashing blue strobe. The entire unit will be surface mountable and weather resistant.
Provide ADA Compliant Communication for Campus Security, Parking Garages, "Area of Refuge" Sites, etc...
The E-1600-BLT emergency phone combines quick and reliable handsfree communication with a high visibility enclosure and pulsating strobe light. Whenever the emergency phone goes off-hook, the 150,000 candle power strobe light is activated and will automatically reset when the call is completed.

The E-1600-BLT meets ADA* requirements for telephones, and can be programmed from any Touch Tone phone. The enclosure provides weather and vandal resistance and the strobe light easily identifies the area requiring attention.

The strobe is powered by an included plug-in power supply, but communication is possible even during power failures. All  phone numbers, location numbers and programming parameters are stored in non-volatile E2 memory. No batteries or power are required to hold the memory.

The E-1600-BLT can also be used with Central Station Monitoring equipment.

  • "Area of Refuge" sites
  • Parking ramps
  • Automated Tellers (ATM)
  • Entryways
  • Campus security sites
  • Roadside emergency sites
  • Stairwells in public buildings
  • Handsfree operation
  • Telephone line powered telephone (will work during power failure)
  • Non-volatile E2 memory (no batteries required)
  • 150,000 candle power blue strobe light
  • Touch Tone or pulse dialing
  • Dials a second number on busy or "no answer"
  • Transmits a unique location I.D. code
  • "Call Connected" LED for the hearing impaired
  • Grade 2 Braille label for the visually impaired
  • Disconnects on CPC, silence, busy signal, dial tone, time out, or Touch Tone command.
  • Automatically answers incoming calls
  • Remotely programmable
  • "Central Station Monitoring" compatible
  • High visibility, vandal and weather resistant housing
  • Vandal resistant polycarbonate strobe lens
  • Surface mountable
  • One year warranty
  • Made in the USA
  • Phone Power: Telephone line powered (24 V DC/20 mA minimum)
  • Strobe Power: 120V AC/12V DC power adapter (included)
  • Maximum Strobe Power Run: 200 ft. using 24 awg wire.
  • Dimensions: 107 cm x 15.24 cm 10.93 cm (42" x 6" x 4.5")
  • Weight:  kg (13 lbs.)
  • Connections: 7 pin screw terminal block
  • Mounting: Surface mount to rigid wall or post
  • Environmental: -26°C to 54° C (-15°F to 130° F) with 5% to 95% non-condensing humidity.
  • Strobe Output: 150,000 candle power (800 hours)
  • Material: Enclosure - .125 aluminum square tube powder painted high-visibility yellow. Phone - Ga. stainless steel with stainless steel button.  Strobe - Vandal resistant polycarbonate plastic