Remote Access Device (Model RAD-1)

NEW
The RAD-1 allows remote access to PABX or Electronic Key system features as well as bridging to a second line or any other 600 ohm source. The RAD-1 provides two levels of security as well as basic toll restriction.
Line Powered Remote Access Device
Viking's RAD-1 remote access device gives authorized users remote access to PABX, Centrex and electronics key system features. It can also provide bridging to a second central office line. With two levels of access and programmable toll restriction, the RAD-a provides the security required to help prevent phone system and toll abuse.

The RAD-1 answers on the first ring and disconnects on CPC, time out or by dialing #7. The 600 ohm "LINE OUT" port provides loop closure for audio access to system features or an external device. For "line extender" applications, the user does not have to hang up and redial the RAD-1 to make another call. The RAD-1 will also provide a hookswitch flash on the "LINE OUT" port to access PABX, Centrex, or electronics key system features.

Note: For voice applications where a decibel loss may occur or for Lucent Partner systems, the RAD-AMP is required.

Applications
  • 1 or 2 way paging (PA-2A, HF-2WC)
  • Silent service observing equipment (SO-24)
  • PABX, Centrex, or electronic key system features (DISA with security)
  • Voice mail and dictation equipment
  • WATS, FX or TIE lines
  • Radio or church programs
  • Audio monitoring for security purposes
  • Other long distance calling zones as a "line extender"
Features
  • Programmable security code
  • Two programmable levels of access
  • Disconnects on CPC, call time-out, toll restriction or manually
  • Non-volatile memory (No batteries required)
  • Auxiliary contacts
  • Call timer
  • 500 millisecond hook switch flash command
  • 2 second disconnect command
Specifications
  • Power: Telephone line powered (24V DC 20mA minimum)
  • Dimensions: 133 mm x 89 mm x 44 mm (5.25" x 3.5" x 1.75").
  • Weight: 1.13 Kg (2.5 lbs.)
  • Environmental: 0° to 32° C (32° to 90° F) with 5% to 95% non-condensing humidity.
  • Connections: (2) RJ-11 jacks, 5 position screw terminal strip
  • Relay Contact Ratings: 220V AC/DC @ 1 amp resistive