Telephone Equipment and Service

When configured as a call diverter, the RAD-AMP can provide uninterrupted call bridging between two lines. Upon detecting and inbound call, the RAD-AMP will dial a pre-programmed number on a second line and then bridge the two lines together for a nearly transparent transfer.

The RAD-AMP can also be configured as an international call back device when equipped with the optional RAD-INTL software. This allows international callers to use less expensive long distance carriers. In this mode, the RAD-AMP will call back the originating party and then provide dialing through Centrex or "Call Transfer" features provided by your phone company.

For "Data" applications, the RAD-1 is required

• Bridging calling zones.
• Utilizing WATS, FX or TIE lines on PABX's and key systems.
• Remote access to system features such as paging and voice mail.
• Remote access to audio sources such as church programs.

Call Diverter

• Forward calls while eliminating central office call forwarding charges.

International Call Back⁽¹⁾

• Utilize less expensive long distance carriers for international calls

• Audio amplifier.
• Programmable security code.
• Remote night switch.
• Disconnects on CPC, busy, dial tone, call time-out, or manually.
• Non-volatile memory (No batteries required).
• Auxiliary contacts
• Call timer
• ⁽²⁾500 millisecond hook switch flash command.
• ⁽²⁾Two second disconnect command.
• ⁽³⁾Twenty digit phone number memory.
• ⁽¹⁾Special firmware (RAD-INTL) available for International Call Back (uses Centrex or "Call Transfer" features).